Beech Wood Three-Tier Display Trolley with Large Wheel | 1000x900x1800mm Buffet Riser GH6561

The GH6561 beech wood three-tier display trolley is a 1800 mm tall mobile merchandising unit for buffet and event spaces. Three slatted shelves climb a leaning frame on one large spoked wheel, so bread, pastry and grab-and-go displays read like a market stall and can be rolled out of the room in one move.

What This Display Trolley Solves

Buffet risers usually sit fixed on a table line, so a display cannot follow the crowd or leave the room when the event moves. The GH6561 is a riser and a trolley at once: it presents three levels of product at guest eye height, then tips back onto its wheel and rolls through a standard door frame when the floor plan changes.

• Three slatted shelves. Open slats air bread and pastry while keeping every tier visible from the front.
• One-wheel mobility. A large spoked wheel and lean-back frame let one person move the loaded unit.
• Tall, slim footprint. 1000 × 900 mm base and 1800 mm height uses vertical space instead of buffet line length.

Beech Wood Built for Public Spaces

The frame and shelves are finished beech wood with a warm brown tone that suits hotel lobbies, bakery corners and brunch stations. Shelf ledges are raised at the back to stop plates sliding, and the unit is specified as scratch resistant for daily public use. The render below shows the tier spacing: each shelf sits roughly 450 mm apart, tall enough for domes or packaged goods on the middle and lower decks.

Front View and Shelf Geometry

The straight front profile keeps the display flush against a wall or counter end, and the simplified storage design means the trolley parks in a service corridor without blocking the aisle. Slatted shelves also make spill cleanup faster than solid decks, since crumbs fall through to the floor rather than pooling.

In the Room: Lobby and Event Use

As a pair with its matching service cart, the trolley anchors a grab-and-go corner in a hotel lounge, as shown below. Hotels use the top deck for packaged snacks, the middle for bread and pastry under domes, and the bottom for bulk display, then roll the whole unit to storage after service.

GH6561 Specifications

Customization and Lead Time

Wood tone, tier spacing and size can be customized, and the trolley pairs with the service carts in the service trolley range for a coordinated set. Production takes 30 to 45 days for large orders and less for small quantities, with single-piece orders accepted; the OEM/ODM manufacturing service page explains the custom process.

Frequently Asked Questions

Plan the full display set with the buffet station product catalog, or sequence the equipment with the professional buffet supplies sourcing guide.